Forum > Decoders > Installation > 3 Decoders Install
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 2018-02-12 , 15:22
Geoff D Geoff D is offline
Technical Myriad
Join Date: Nov 2008
Location: PTA
Posts: 16,625
Originally Posted by VishM View Post
I currently have the explora 1 as the primary.
There is no heart beat at the moment. Just unicable to 2X explora decoders.
IF you want to then I would suggest you get the Explora 2 to be the Primary and the two older decoders to be set to secondary when you activate it all.

Make sure the Unicable connection on the decoder side is on the correct diplexer port! The switch requires power from the decoders to work, hence why it is supposed to be a DC pass port.
Spare decoders: SD PVR(3) PSU's, DSD 660, 1110, 1131, Explora 1.
Spare switches and LNBs: 1 x 5-1(repaired); 1 x 5-2.Numerous so called faulty LNBs that were easily repaired.
2 unmentionable FTA decoders
1.2m antenna, 8-way universal LNB, 2 x (2x6) MS, FSM permanently connected.

Last edited by Geoff D; 2018-02-12 at 15:24. .
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
install extra view on two 1131 decoders z2010 XtraView 20 2010-12-07 08:41
Xtraview install question. J Gundlach XtraView 2 2009-02-27 13:47
Interferance on channels after Hd install kckid XtraView 13 2009-02-08 20:03
how difficult is it self install/upgrade from old decoder to SD PVR MR.C Installation 3 2009-02-06 16:27