For those taking the above "shortcut" (just the same as doing it in the menu), please first see the thread I gave a link to as there are a number of things to check first, failing which could lead to an unneeded re-format or things like XtraView setup problems etc. that then require headaches / expense to sort out again.
Still not a dumb issue, odd errors happen in all industries of course and can't always be imagined and prepared for.
As you know your contributions are appreciated, I'm sure by all, but please take care not to sometimes rush your conclusions when you haven't been around and involved for a while like we have, potentially undoing things we've worked long & hard determining and helping with. There has been a lot of confusion and further problems caused for some by this Explora error due to quite a few complexities you've missed, some of which involved discussion with the Mods. My above concerns are just a few of them. Thanks.
Originally Posted by wezhira
And yes the signals will be great just a error on the decoders
So far, unlike with older decoders we have seen very few possibilities of that degree of error on the many Exploras worked on here and only a couple of those were actually suspected but never confirmed to have any confusing enough variation.
But if you have FSM readings that can confirm this then that would be very helpful.
I'm sure you may want to add more but I'll leave it there as I've now covered what I consider necessary.