[ManieB]

My problem is unfortunately not solved because if I connect my XV 2P decoder to LNB and primary (ex1) then problem of dropped signal on some channels returns. If I disconnect the XV decoder the problem goes away. So I do need to do something on the XV decoder to stop it from interfering with the primary. I suspect it is the frequencies on the XV need to be set to use user bands 0:1210 and 1:1420 to avoid conflict with primary (which is now using 3:2040, 4:1006 and 5:1057. Will check and revert this evening

[cdbjhb]

Alright, it sounded like you had finished the LNB connections in your post 5, but now you do have a firm concept of what needs to be done

[Jan Horn]

Manie My setup is identical to yours Explora Primary and XV HD PVR 2P LMX 501 SLNB

Herewith screenshots of my User band settings.

[ManieB]

My XV does not have the white edit button in order to set the user bands. Do I use SatCR or SatCR univ? See pic attached

[ManieB]

Originally Posted by ManieB

My XV does not have the white edit button in order to set the user bands. Do I use SatCR or SatCR univ? See pic attached

My xv decoder is a pace TDS850


Sent from my iPad using Tapatalk

[MC Field Services]

Manie plz send me a private message with your contact details plz, so that I may call you.

[ManieB]

Originally Posted by MC Field Services

Manie plz send me a private message with your contact details plz, so that I may call you.

Have sent you a PM


Sent from my iPad using Tapatalk

[ManieB]

Finally some success. Primary explora set to user bands 4,5 and 6 and secondary tds850 set to SatCR. It does take a while to sort itself out- it's not instantaneous. Now to tackle my Ethernet problem.

[cdbjhb]

Originally Posted by ManieB

and secondary tds850 set to SatCR.

At some time change it to SATCR Univ, that will allow it to also work with future hi band channels that are coming one day.

We call the 850 the Pace 4 tuner. It being 4 tuners will be why you had to chasnge to something like Optimist's original suggestions.