Forum > Decoders > Installation > Dstv 4137 5s Inatallation
Thread Tools Display Modes
Old 2017-11-12 , 18:22
MC Field Services MC Field Services is offline
Has mastered the i-Plate and DStv guide
Join Date: Dec 2015
Posts: 337
Explora's and HD pvrs must always be primary in xtraview, HD5 can be set to primary in any other combination.
In Xtraview 3 the primary decoder sends out a heartbeat signal which both secondary decoders recieve, this can be via the lnb cable or RF ports from the primary decoder - Explora 2 is recommended
It is recommend that the explora 2 will always be primary even if there is a explora 1 in the combination, as explora 1 only sends the heatbeat out of the rf ports.
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Dstv 4137 5s fahmemaal786 Standard Decoders 14 2017-11-10 13:27