Thread Tools Display Modes
Old 2017-08-13 , 10:49
gavinp12 gavinp12 is offline
Still listens to the wireless
Join Date: Mar 2015
Posts: 7
Default tv link

I have two saeperate decoders in my lounge, one is for bedroom, cabling to bedroom. there is a "link" on the cable going into the bedrooms tv, so the remote works in the bedroom. two days ago the bedroom remote stopped working and the little red light in the link attached to the cable went off? Now I have to change the channel with
the bedroooms remnote in the lounge? the "link" not working??
Reply With Quote
Old 2017-08-14 , 08:43
Optimist Optimist is offline
Changes remote batteries hourly
Join Date: Jul 2012
Location: N/E JHB
Posts: 15,379
Just going to get you started.
In your case it doesn't sound like you have a SD PVR decoder so then not likely to be an ageing circuitry issue.

With that out of the way - most likely that either the TV Link setting in that decoder's menu has accidentally been turned off / reset, or the TV Link Eye itself has developed a fault.

After checking the setting (and then maybe trying a reboot 15 minutes later), if still no good try moving the Eye to directly behind the decoder and see if it works there.
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
4 link Distribution TV Link Amp and CCTV Dataking PVR Decoders 1 2015-02-04 08:48
SD PVR TV Link Not Working Boss001 Installation 16 2012-08-17 08:49
Getting E73 ("TV-Link Overload") on when using TV-Link on SD PVR maik Installation 4 2011-12-12 01:23
TV Link Barendb Remote Controls 10 2008-11-25 14:07
Link doesn't work radjanoonan HD PVR 2 2008-11-13 21:32