Forum > Decoders > PVR Decoders > Signal strength / quality on Explora
Reply  
Thread Tools Display Modes
  #51  
Old 2017-04-20 , 20:37
Conrad67 Conrad67 is offline
Still listens to the wireless
 
Join Date: May 2016
Posts: 4
Quote:
Originally Posted by Geoff D View Post
No the reformat story is an absolute last resort action!

There are a few other things to check though.

(1) What LNB do you have in place? is it a Twin LNB plus ES switch or do you have a Smart LNB installed.

(2) How old are the cables? Have you physically checked the cables outside for damage? The same goes for the LNB Is it showing signs of perishing or cracks or damage?

(3) What are the signal strength and quality values on all 3 tuners.

Start a recording before checking these values to ensure you get a true reading for tuner 2.

Do this when viewing ch 262 and ch 405 and post the results.

It could be a simple issue with the LNB skew angle but lets see the results first.
My results are as follows:
262
T1 72% & 100%
T2 76% & 100%
T3 74% & 82%

405
T1 74% & 85%
T2 74% & 100%
T3 74% & 82%

What is the verdict please...

Sent from my SM-G920F using Tapatalk
Reply With Quote
  #52  
Old 2017-04-20 , 21:08
Geoff D Geoff D is offline
Technical Myriad
 
Join Date: Nov 2008
Location: PTA
Posts: 16,476
Pretty good values and typical of a rushed installation. The skew angle adjustment would benefit from a little bit of fine tuning.

Values not poor enough to explain why you are not successfully downloading CU and BO content. There must be another issue causing problems. Maybe send MC Solomon a PM message and ask him to verify that your service has been set up properly.
__________________
Easyview, UEC 4T HD PVR, SD PVR, XV
Spare decoders: SD PVR(2), PACE HD PVR 4T, DSD 660, 1110, 1131, Explora 1
2 unmentionable FTA decoders
Win 10 Pro (64-bit) version 1703, build 15063.138
1.2m antenna, 8-way universal LNB, 2x6 MS, FSM permanently connected.
MS Edge 40 with MSEdge HTML 15
Reply With Quote
  #53  
Old 2017-04-21 , 09:12
Optimist's Avatar
Optimist Optimist is offline
Changes remote batteries hourly
 
Join Date: Jul 2012
Location: N/E JHB , Orig. Join Date: Dec 2008
Posts: 14,497
One further post from me, can't fully agree - MC recommends that the Exploras should have 90%+ for all signal quality readings. In my experience one can get away with a bit less, perhaps as low as around 88%, but I would be concerned about 85% on horizontal, and the tuner 3 82% is likely too low to rely on.

Experience suggests that the signal strengths are survivable for some from the early 70's, though 75%+ is suggested and 80%+ preferred.

Part of the problem is just how accurate the decoders' readings are as far as variations go from unit to unit, many cases on this forum suggest that the recommended values are the best to aim for.

However, I now see that we've all misread your first post... you say you are having problems with Catch Up Plus (CU+), not with Catch Up (CU).
CU+ has nothing to do with the satellite signals, it only uses your internet connection.
I suggest you try disabling CU+ in the menu: Settings \ User Preferences \ Connected Services - Explora Connected Services
Then reboot, then enable it again.
Reply With Quote
  #54  
Old 2017-04-21 , 14:39
MC Mpho's Avatar
MC Mpho MC Mpho is offline
Moderator
 
Join Date: Feb 2016
Posts: 245
Hi everyone,
Thank you for your assistance.

Conrad, please let us know how it goes after you have tried Optimist's suggestion/recommendation.

Regards,
MC Mpho
Reply With Quote
Reply  
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Low signal quality but high signal strength Frankie_SA Picture/Audio Quality 5 2014-02-25 07:50
Explora Signal Strength. Racer Explora HD PVR 3 2013-11-16 09:34
Signal Strength and Quality Berjhay Installation 10 2012-05-24 14:39
Signal Quality / Strength roberichansen HD PVR 8 2010-02-25 13:10
Signal Quality/strength Switch XtraView 2 2009-01-26 22:54