Forum > Decoders > Installation > Remote link eye
Reply
Thread Tools Display Modes
  #1  
Old 2017-02-23 , 20:44
abswart abswart is offline
Still listens to the wireless
 
Join Date: Feb 2017
Posts: 6
Default Remote link eye

Hi
I purchased a new eye from Ellies to replace a faulty one.I have installed the eye and have power and I am picking up the channel but cannot change channels or volume via the eye. The installation hints included in the packaging are badly reprinted so I cannot read the last instruction which says "enable TV link on decoder. Please could someone post the instructions to enable the TV link/remote eye.
Thanks

Last edited by abswart; 2017-02-23 at 21:06. . Reason: .
Reply With Quote
  #2  
Old 2017-02-24 , 09:28
MC Field Services MC Field Services is offline
Has mastered the i-Plate and DStv guide
 
Join Date: Dec 2015
Posts: 325
Enable the TV link in the menu ,Test the Tv link at back of the decoder and at the back of your Tv set. If the Tv link works at the back of the decoder and not at your Tv set, than you will need to test each joint along the cable run, end to end testing to establish where the Tv link stops functioning.
Reply With Quote
Reply
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Ellies Remote Link Eye for DStv VuvuMoG Installation 22 2012-04-16 19:59
Remote Link Eye CraigViking Remote Controls 2 2011-10-02 17:18
HDPVR/X-Tra view TV-Link Magic Eye remote Roolus Remote Controls 2 2010-11-07 21:01
SD PVR TV2 image goes blurry when TV Link eye is connected shakste Installation 4 2010-06-08 11:48
tv link eye tHOMAS XtraView 5 2009-06-29 08:57