Forum > Decoders > Installation > HD PVR 4 Tuner and Single View HD installation
Reply
Thread Tools Display Modes
  #1  
Old 2017-07-15 , 10:36
Dstv Bro Dstv Bro is offline
Still gets up to change channels
 
Join Date: Oct 2013
Posts: 23
Default HD PVR 4 Tuner and Single View HD installation for extra view

How will i install the HD PVR 4 Tuner and the Single View HD for extra view if i have a 80cm dish and a smart lnb?

What ports on the lnb will i use for each decoder? Shall i choose the satcr option at the lnb settings on the HD PVR 4 Tuner? Do i have to change any frequency settings on the decoders then?

Last edited by Dstv Bro; 2017-07-15 at 10:48. .
Reply With Quote
  #2  
Old 2017-07-17 , 09:38
Geoff D Geoff D is offline
Technical Myriad
 
Join Date: Nov 2008
Location: PTA
Posts: 16,391
Quote:
Originally Posted by Dstv Bro View Post
How will i install the HD PVR 4 Tuner and the Single View HD for extra view if i have a 80cm dish and a smart lnb?

What ports on the lnb will i use for each decoder? Shall i choose the satcr option at the lnb settings on the HD PVR 4 Tuner? Do i have to change any frequency settings on the decoders then?
(1) Which SLNB model is used in your install? LMX 501 or LMX 500?
(2) Use Port A on the SLNB for the HD PVR 4 tuner decoder. Connect the cable to the SATCR port on the back of the decoder. Set the LNB mode to SATCR (the best at the moment). The decoder will use as a default, user bands 0,1,2,3 with the associated frequencies.
(4) For the Single view HD decoder models 4U and 4S, you have a choice.

(a) Leave the decoder at default network settings, then connect the decoder to one of the legacy (Universal) ports on the SLNB. Probably the best option. Run an RF connection between the two decoder for the HB signal.

OR

(b) use port B on the SLNB BUT then you have to change the default network settings to SATCR/Unicable on the 4U/4S and change the userband used to 4 or above, just do not use 0,1,2,3. Run the HB cable connection between the decoders off the RF ports.
__________________
Easyview, UEC 4T HD PVR, SD PVR, XV
Spare decoders: SD PVR(2), PACE HD PVR 4T, DSD 660, 1110, 1131, Explora 1
2 unmentionable FTA decoders
Win 10 Pro (64-bit) version 1703, build 15063.138
1.2m antenna, 8-way universal LNB, 2x6 MS, FSM permanently connected.
MS Edge 40 with MSEdge HTML 15
Reply With Quote
  #3  
Old 2017-07-17 , 11:33
MC Field Services MC Field Services is offline
Has mastered the i-Plate and DStv guide
 
Join Date: Dec 2015
Posts: 325
HD 4 tuner works fine on the LMX501 new smart lnb , however on the old LMX500 cable length is a issue.
as advised keep the HD 4 tuner decoder on default freq 0:1210 1:1420 2:1680 3:2040
put the single view decoder on freq 4:1006 or u can leave on the universal port .
as advised above
Reply With Quote
Reply
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
4 tuner and 2 tuner for extra view 1411xx XtraView 8 2012-09-08 14:33
Downgrading from SD Dual View PVR to Single View PVR spiff SD PVR 2 2010-10-19 12:40
What do I need for HD PVR installation? (Already have single view decoder and dish) bernadine.jones HD PVR 11 2010-06-08 09:26