Forum > Decoders > Installation > Explora 2 and HD PVR 2P xtraview
Reply
Thread Tools Display Modes
  #1  
Old 2017-07-11 , 10:03
RuanJMeiring RuanJMeiring is offline
Still listens to the wireless
 
Join Date: Sep 2015
Posts: 1
Default Explora 2 and HD PVR 2P xtraview

Hi there

I currently have a HD PVR 2P + 1131 xtraview set-up. (With twin LNB)

I've purchased a new Explora 2 and Smart LNB (LMX501) to replace my 1131 Decoder.

How do I now connect the Explora 2 and HD PVR 2P to the smart LNB and what would the userband settings be?

HB will be as corrently via RF.

Thanks
Reply With Quote
  #2  
Old 2017-07-11 , 10:23
Jan Horn's Avatar
Jan Horn Jan Horn is offline
Has mastered the i-Plate and DStv guide
 
Join Date: Feb 2016
Location: Welkom RSA
Posts: 411
My current setup is exactly that, Explora 2A primary and Pace 2p Extra View.

The Pace 2P was left at the default 0 and 1 user bands the Explora 2A uses user bands 4,5 and 6. The home network was done by the local MC agent at the time and is working well.

Explra connected to port A and 2p to B
__________________
Explora 2 + Pace HD PVR P2 XV SLNB 80cm Dish Vodacom Power Tab 10
Reply With Quote
  #3  
Old 2017-07-17 , 11:47
MC Field Services MC Field Services is offline
Has mastered the i-Plate and DStv guide
 
Join Date: Dec 2015
Posts: 307
Agree .settings as per Jan are correct .
Reply With Quote
  #4  
Old 2017-09-02 , 02:17
Installers2015 Installers2015 is offline
Still listens to the wireless
 
Join Date: Apr 2015
Posts: 1
Did you manage to get everything working, please share your decoder settings

Sent from my SM-G610F using Tapatalk
Reply With Quote
  #5  
Old 2017-09-02 , 09:29
Optimist's Avatar
Optimist Optimist is offline
Changes remote batteries hourly
 
Join Date: Jul 2012
Location: N/E JHB , Orig. Join Date: Dec 2008
Posts: 13,850
@Installers2015 - this is very troubling, how does a group of people claiming to be installers for at least 2 years not understand such basic setups and settings???
And then to have the nerve to ask the public to help you learn?! In the 2 years you've been a member here you couldn't find that info??

Tell you what, in the hope that it does enough good for those you're affecting and to give you the benefit of the doubt I'll point you in the right directions once, but not again.
Smart LNB (SLNB) installations and settings
General technical assistance for installation, decoder usage and errors
Reply With Quote
  #6  
Old 2017-09-02 , 12:19
Optimist's Avatar
Optimist Optimist is offline
Changes remote batteries hourly
 
Join Date: Jul 2012
Location: N/E JHB , Orig. Join Date: Dec 2008
Posts: 13,850
And now, a bit on the side of non-accredited installers and for those doing DIY - some info is not made clear in the industry, so to help here's what is important (has also been added to the first 2 threads listed above);

1. The sharing of the User Band Index for tuner 3 is no longer fully possible if both the Explora 1 and Explora 2A are in the mix as they use different transponders for the VOD stream. Only if there are 2 or 3 x model 1, OR, 2 or 3 x model 2A involved can those two or three share. (All such installers should have realised this by now.)
2. Which Indexes are chosen and their order is not important, just generally prevent the sharing of Indexes.
3. All of an Explora's Index settings are best done first, then the associated Frequency settings.
4. Also note that some Frequencies
differ between the Smart LNB (SLNB) & 24-1Z Smart Switch and the older 5-1 & 5-2 Explora Switches. (All such installers should have noticed this in the supplied documentation.)

Last edited by Optimist; Yesterday at 15:54. . Reason: Clearer wording
Reply With Quote
Reply
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
XtraView: Explora 1 + Explora 2A + HD PVR 2P- Possible? Die Meester Installation 5 2017-05-29 12:47
Explora 2 and Explora in XtraView diver Installation 1 2017-01-23 13:05
Explora and HD PVR Xtraview issues Grumpy-EDS Installation 1 2014-08-16 09:06
Xtraview install Explora and SD PVR Seanmo Installation 2 2014-07-21 21:56
Xtraview installation between Explora and 4P HD PVR Cobus Griesel Installation 3 2014-05-14 16:21