Thread Tools Display Modes
  #1  
Old 2014-04-16 , 15:17
jlouw jlouw is offline
Still gets up to change channels
 
Join Date: Aug 2010
Posts: 10
Default E50 error (E71 after reboot)

Primary decoder : HDPVR
Secondary decoder: SDPVR

TV2 on SDPVR gives E50 error. (After powering off and on again, it gives E71 error, since it tries to start in the audio channels. After pressing shift-TV and selecting the DSTV bouquet, it goes back to E50 error)

TV1 and TV2 have good signal. TV1 works normally. HDPVR works normally. Heartbeat is fine.
  #2  
Old 2014-04-16 , 18:02
cdbjhb cdbjhb is offline
Changes remote batteries daily
 
Join Date: Dec 2012
Posts: 534
Your TV2 is stuck in an in-between state, between the audio and TV bouquets.

Press the TV button on your remote 2 or 3 times until the list of bouquets is displayed, then select "DStv" and press OK.
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
8175 error Then Reboot sugarncre SD PVR 31 2014-01-29 08:58
UEC HD PVR 4T and SD PVR reboot Geoff D HD PVR 1 2013-12-18 10:14
8175 error Then Reboot sugarncre SD PVR 0 2013-11-29 23:26
Reboot after reboot Lollyj SD PVR 0 2013-08-29 13:22
Box office error code 03 after reboot?? LesleyH SD PVR 9 2012-06-28 11:39