Forum > Decoders > Installation > Explora Switch (ES) / Smart Switch installations and settings
Reply
Thread Tools Display Modes
  #1  
Old 2017-04-08 , 11:40
Optimist's Avatar
Optimist Optimist is offline
Changes remote batteries hourly
 
Join Date: Jul 2012
Location: N/E JHB , Orig. Join Date: Dec 2008
Posts: 14,441
Arrow Explora Switch (ES) / Smart Switch installations and settings

This is just a repeat of info posted elsewhere, done to allow for easier finding of this specific info.

Sharing of the User Band Index for tuner 3 is no longer fully possible if both the Explora 1 and Explora 2A are in the mix as they use different transponders for the VOD stream. Only if there are 2 or 3 x model 1, OR, 2 or 3 x model 2A involved can those two or three share.

Which Indexes are chosen and their order is not important, just generally prevent the sharing of Indexes.
All of an Explora's Index settings are best done first, then the associated Frequency settings.
Also note that some Frequencies differ between the Smart LNB (SLNB) & 24-1Z Smart Switch and the older 5-1 & 5-2 Explora Switches, the details re the older switches are given below.

Note that the latest Explora Switch (ES), the "24-1Z", is also called the Smart Switch by MC.

Smart Switch (etc) - indexes' frequencies.jpg

(For the best related LNB choices, as far as future needs go as well, please see: Preparing for Hi Band (NOT an immediate need) )

The 24-1Z version switch offers 24 User Bands (indexes 0 to 23).

The 5-1 and 5-2 versions can only use the first 5 indexes (0 to 4). But note that officially for index 3 you use frequency 1892, and index 4 uses frequency 2040.
(Also note that the 5-1 switch does not have any markings on it about what version it is.)

If need be, two (*or three) Exploras of the same model can share their tuner 3's index of choice (older Exploras are called model 1, newer Exploras are called model 2A).
*But three Exploras is only possible with the 24-1Z switch, not with the older 5-1 or 5-2 switch (unless 2 older switches are cascaded - not recommended).

Lastly, even two Exploras is not recommended with the oldest 5-1 switch.
If you must try, make sure the unicable output cables are the same length and are kept short (both Exploras in the same room then).


Contributions to this thread are only meant to be from Mods and seriously involved senior Forumites.
Please don't otherwise post in this thread.
Questions and comments in another thread are always very welcome. )

Last edited by Optimist; 2017-09-23 at 15:57. . Reason: Detail
Reply With Quote
Reply
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Smart LNB (SLNB) installations and settings Optimist Installation 5 2017-07-20 11:22
New Installations using the Smart LNB Geoff D Installation 180 2017-07-18 19:04
Smart LNB frequency settings Brentvdb21 Installation 6 2015-07-24 18:30
multi switch to multi switch l3ok Installation 11 2012-10-26 14:12
HD PVR 2 and Xtraview 1131 Installations and Connections Rodric.Leyds@dac.gov.za XtraView 6 2011-03-08 21:29