Thread Tools Display Modes
  #1  
Old 2012-06-06 , 11:46
markvg markvg is offline
Changes remote batteries daily
 
Join Date: Jun 2011
Location: Durban
Posts: 1,004
Default Hex Codes MNEC and TV2)

Hi All

Refering to the sticky http://forum.dstv.com/showthread.php?t=3624

Does anyone have updated Hex Codes for the DSTV Devices? I am specifically looking for the Hex Codes for the new MNEC protocol for the HD and SD PVR for TV1 and TV2?

I have an issue with my Harmony One + remote and would like to get the Logitech guys to load the remote commands from Hex codes rather that learning them (and suffering the interference etc). It seems that LEARNED commands can has all sorts of spurious data which make the remote seem sluggish and sometimes so odd things (as in my case).

Any Information would be great.

Mark
__________________
UEC DSR4660 HDPVR (Primary) & SD DualView PVR (Secondary) with Xtraview. HDMI via SONY STR-DH710 amp. 2x6 Ellies MultiSwitch. Xtraview via RF Out/RF Out. TV SONY KDL-32EX600. SONY PS3.
  #2  
Old 2012-06-11 , 07:18
: ) C4's Avatar
: ) C4 : ) C4 is offline
MultiChoice
 
Join Date: Nov 2008
Location: Planet Zogg
Posts: 1,437
I'll check and come back to you.
__________________
I don't believe in astrology. I am a Sagittarius and we're very skeptical.
~ Arthur C Clarke
  #3  
Old 2012-06-12 , 08:08
: ) C4's Avatar
: ) C4 : ) C4 is offline
MultiChoice
 
Join Date: Nov 2008
Location: Planet Zogg
Posts: 1,437
The pronto version of the codes which should allow Harmony integration will be made available as a sticky soon.
__________________
I don't believe in astrology. I am a Sagittarius and we're very skeptical.
~ Arthur C Clarke
  #4  
Old 2012-06-12 , 08:25
markvg markvg is offline
Changes remote batteries daily
 
Join Date: Jun 2011
Location: Durban
Posts: 1,004
Smile Thanks

Thank you. I see they have been posted
__________________
UEC DSR4660 HDPVR (Primary) & SD DualView PVR (Secondary) with Xtraview. HDMI via SONY STR-DH710 amp. 2x6 Ellies MultiSwitch. Xtraview via RF Out/RF Out. TV SONY KDL-32EX600. SONY PS3.
  #5  
Old 2012-06-12 , 09:16
markvg markvg is offline
Changes remote batteries daily
 
Join Date: Jun 2011
Location: Durban
Posts: 1,004
Default SD Dual View

@C4

I see that according to this sticky http://forum.dstv.com/showthread.php?t=16108 the new A4 remotes will be able to control the SD PVR as well - I assume that this will be after the software has been updated.

This will present a problem for me! I have a UEC 4T (TV1) an SD Dual View as well as a Pace 2T (TV2) all in the same room. UEC and Dual View linked by XtraView.

They currently do not conflict, however I am sure that once the Dual View understands the MNEC commands (TV1 and TV2) there is going to be a problem! The DualView will then be responding to the HD PVR remote commands as well?

Any advise?

Thanks
Mark
__________________
UEC DSR4660 HDPVR (Primary) & SD DualView PVR (Secondary) with Xtraview. HDMI via SONY STR-DH710 amp. 2x6 Ellies MultiSwitch. Xtraview via RF Out/RF Out. TV SONY KDL-32EX600. SONY PS3.
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
MC codes for the SD PVR Brian G Remote Controls 2 2011-10-13 16:21
HD PVR TV2 Hex Codes DogBiscuit Remote Controls 2 2011-06-01 14:41
Remote codes QuadMedic Remote Controls 3 2010-07-30 08:24
Error codes maik Standard decoder 1 2010-02-11 13:09