Forum > Decoders > Installation > Smart Lnb + 2 seperate dstv subscriptions
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 2017-04-21 , 09:43
mbeylis mbeylis is offline
Knows how to use a remote
 
Join Date: Sep 2009
Posts: 151
Quote:
Originally Posted by Geoff D View Post
Time for a recap on what you have connected and how.

The Exploras will fail on you if there is no signal available for tuner 3.

The EPG should not be working and displaying and CU and BO downloads should not be updating.
Well according to the Tuner Status under Help || General - Tuner 1 is working (80% Strength, 100% quality). Tuner 2 also works when I am recording (thanks for that info Optimist). Tuner 3 however shows nothing but the EPG is defiantely working and there is content on CU and BO (whether its updating with new content I am not sure)

Quote:
Originally Posted by Geoff D View Post

SLNB port A - connected to Explora

SLNB port B connected to Explora

SLNB port C connected the HD PVR 4 T
Correct on Port A and B. Port C is however capped and rather the HD PVR 4 T is connected to the Universal Port. Also this is not direct as the HD PVR 4 requires 4 cable inputs so it first goes into the ES as one cable for the LNB then splits into 4 cables to the HD PVR 4 although from previous posts I see that I can just use the 1 port on the HD PVR 4 direct from the Universal port on SLNB. I will remove the ES and doe this although with my current setup using the ES it is working though

Quote:
Originally Posted by Geoff D View Post
Network Settings on each decoder
Explora 1: (parents)
Tuner 1 - Index 0 - Frequency 1210
Tuner 2 - Index 1 - Frequency 1420
Tuner 3 - Index 2 - Frequency 1680

Explora 2 (mine)
Tuner 1 - Index 6 - Frequency 1108
Tuner 2 - Index 7 - Frequency 1159
Tuner 3 - Index 8 - Frequency 1261

HD PVR 4

Will need to check


Quote:
Originally Posted by Geoff D View Post
HD PVR should be set to SATCR Universal
Will need to check

Quote:
Originally Posted by Geoff D View Post
Explora user band settings. No ES in the loop.
ES still in loop but simply to get HD PVR 4 splitting of cables from 1 - 4 but will change this now
__________________
Smart LNB
Primary (Explora)
Extraview 1 : Explora
Extraview 2 : Coming Soon
Cables : Many
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Replaced my SATCR LNB with Smart LNB now I have problems deejaycee_2000 Installation 21 2016-05-24 09:54
Xplora & Dual view SDPVR xtraview using DSTV smart LNB Flipster Installation 3 2015-07-01 15:53
Two Subscriptions on 1 Dish johnnyd7 Installation 10 2015-03-19 13:51
One dish two subscriptions Avroman Installation 5 2012-10-10 13:33
DSD990 still OK for new subscriptions? Jack Standard decoder 11 2012-05-30 18:46