Forum > Decoders > PVR Decoders > Signal strength / quality on Explora
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 2017-04-20 , 20:37
Conrad67 Conrad67 is offline
Still listens to the wireless
Join Date: May 2016
Posts: 4
Originally Posted by Geoff D View Post
No the reformat story is an absolute last resort action!

There are a few other things to check though.

(1) What LNB do you have in place? is it a Twin LNB plus ES switch or do you have a Smart LNB installed.

(2) How old are the cables? Have you physically checked the cables outside for damage? The same goes for the LNB Is it showing signs of perishing or cracks or damage?

(3) What are the signal strength and quality values on all 3 tuners.

Start a recording before checking these values to ensure you get a true reading for tuner 2.

Do this when viewing ch 262 and ch 405 and post the results.

It could be a simple issue with the LNB skew angle but lets see the results first.
My results are as follows:
T1 72% & 100%
T2 76% & 100%
T3 74% & 82%

T1 74% & 85%
T2 74% & 100%
T3 74% & 82%

What is the verdict please...

Sent from my SM-G920F using Tapatalk
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Low signal quality but high signal strength Frankie_SA Picture/Audio Quality 5 2014-02-25 07:50
Explora Signal Strength. Racer Explora HD PVR 3 2013-11-16 09:34
Signal Strength and Quality Berjhay Installation 10 2012-05-24 14:39
Signal Quality / Strength roberichansen HD PVR 8 2010-02-25 13:10
Signal Quality/strength Switch XtraView 2 2009-01-26 22:54