Forum > Decoders > Installation > 3 Decoders Install
Reply  
Thread Tools Display Modes
  #11  
Old 2018-02-12 , 15:22
Geoff D Geoff D is offline
Technical Myriad
 
Join Date: Nov 2008
Location: PTA
Posts: 16,584
Quote:
Originally Posted by VishM View Post
I currently have the explora 1 as the primary.
There is no heart beat at the moment. Just unicable to 2X explora decoders.
IF you want to then I would suggest you get the Explora 2 to be the Primary and the two older decoders to be set to secondary when you activate it all.

Make sure the Unicable connection on the decoder side is on the correct diplexer port! The switch requires power from the decoders to work, hence why it is supposed to be a DC pass port.
__________________
Easyview, UEC 4T HD PVR, PACE 4T HD PVR, XV
Spare decoders: SD PVR(3) PSU's, DSD 660, 1110, 1131, Explora 1.
Spare switches and LNBs: 1 x 5-1(repaired); 1 x 5-2.Numerous so called faulty LNBs that were easily repaired.
2 unmentionable FTA decoders
1.2m antenna, 8-way universal LNB, 2 x (2x6) MS, FSM permanently connected.

Last edited by Geoff D; 2018-02-12 at 15:24. .
Reply With Quote
  #12  
Old 2018-02-17 , 08:32
MC Field Services MC Field Services is offline
Has mastered the i-Plate and DStv guide
 
Join Date: Dec 2015
Posts: 340
Explora 2 has amplification on the lnb port used for uniview and thus is recommended as the primary to overcome loss through the cables and diplexers, the explora 1 doesnt have amplification and can be affected by bad cable or connectors, thus losing the heart beat. Where possible always make the primary an explora 2 unless your running covential heart beats via RF in or RF out than it wont make a difference as there is no amplification on the RF ports
Reply With Quote
  #13  
Old Today , 11:20
VishM VishM is online now
Still gets up to change channels
 
Join Date: Aug 2014
Posts: 20
So I have purchased the attached diplexer. Would the cable from the smart switch run on the power pass side(red line) and the RF OUT through the black line?
Attached Images
File Type: jpg diplexer1.jpg (51.9 KB, 1 views)
Reply With Quote
Reply  
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
install extra view on two 1131 decoders z2010 XtraView 20 2010-12-07 08:41
Xtraview install question. J Gundlach XtraView 2 2009-02-27 13:47
Interferance on channels after Hd install kckid XtraView 13 2009-02-08 20:03
how difficult is it self install/upgrade from old decoder to SD PVR MR.C Installation 3 2009-02-06 16:27