Thread Tools Display Modes
Old 2018-03-12 , 15:54
charlh charlh is offline
Still gets up to change channels
Join Date: May 2017
Posts: 15
Default Auto reboot

Is there any way to disable the decoder (4U HD decoder) from looking for updates daily? Or to set it to only reboot if there is an update. It is rather irritating if when decoder suddenly reboots in the middle of something.
Or maybe that is a feature that you could add to a future software update...
Reply With Quote
Old 2018-03-12 , 20:45
Geoff D Geoff D is offline
Technical Myriad
Join Date: Nov 2008
Location: PTA
Posts: 16,684
Don't have direct experience with these decoders. Check in the setup section if there is a time setting for the maintenance reboot. It should be somewhere around 03:00 - 04:00 in the morning. As to the other reboots? Get used to it. MCs decoders reboot all the time for no logical reason.
Spare decoders: SD PVR(3) PSU's, DSD 660, 1110, 1131, Explora 1.
Spare switches and LNBs: 1 x 5-1(repaired); 1 x 5-2.Numerous so called faulty LNBs that were easily repaired.
2 unmentionable FTA decoders
1.2m antenna, 8-way universal LNB, 2 x (2x6) MS, FSM permanently connected.
Reply With Quote
Old 2018-03-13 , 14:57
charlh charlh is offline
Still gets up to change channels
Join Date: May 2017
Posts: 15
There is an option to set the time only. Nothing else. Problem is at that time the decoder reboots, even though there is no update.
Reply With Quote
Old 2018-03-13 , 15:04
Optimist's Avatar
Optimist Optimist is offline
Changes remote batteries hourly
Join Date: Jul 2012
Location: N/E JHB
Posts: 15,624
Practically it's not a problem, and everyone with modern DStv decoders has had it for many years. According to MC there's a multitude of variables etc. that need to be regularly reset to deliver better performance, and other ways of doing this are too complex so it was decided not worth it.
Old argument, won't be considered.

And if you're watching something, a message pops up that you can say no to. If recording, your recording takes precedence.

Last edited by Optimist; 2018-03-13 at 15:13. . Reason: Detail
Reply With Quote
« Previous Thread | Next Thread »
Thread Tools
Display Modes
Posting Rules
You may not post new threads  | You may not post replies  | You may not post attachments  | You may not edit your posts
BB code is On  | Smilies are On  | [IMG] code is On  | HTML code is Off
Similar Threads
Thread Thread Starter Forum Replies Last Post
Reboot after reboot Lollyj SD PVR 0 2013-08-29 13:22
BE 1 Error after auto-upgrade Ashley_Borges Standard decoder 23 2010-09-13 09:22
Reminders / Auto-tuning Greggles Standard decoder 6 2009-01-21 08:44
1110 - Remote stops working after auto download davey Standard decoder 4 2008-12-16 17:31
Auto Record Series Alien66 SD PVR 3 2008-12-01 08:28