View Single Post
  #202  
Old 2017-10-16 , 12:29
Geoff D Geoff D is online now
Technical Myriad
 
Join Date: Nov 2008
Location: PTA
Posts: 16,684
Quote:
Originally Posted by Frans View Post
The SD PVR is trying to boot now for more than 3 weeks.
It's stuck on Scan
have you got another decoder, even an old one that you can connect to each cable one at a time and at least establish that you have a good signal?

Then try and get the decoder to time out of the scanning process by deliberately disconnecting both feeds so that you can see what is going on with the settings and even restore defaults.

If you cant get this to work, then unfortunately the SD PVR has gone faulty and it is at the end of the line.
__________________
Easyview, UEC 4T HD PVR, PACE 4T HD PVR, XV
Spare decoders: SD PVR(3) PSU's, DSD 660, 1110, 1131, Explora 1.
Spare switches and LNBs: 1 x 5-1(repaired); 1 x 5-2.Numerous so called faulty LNBs that were easily repaired.
2 unmentionable FTA decoders
1.2m antenna, 8-way universal LNB, 2 x (2x6) MS, FSM permanently connected.
Reply With Quote